ANSI/ASME
The range of fittings compliant with the American standard ANSI/ASME B16.9 starts from an outside diameter of ½" (21.34 mm) and goes up to 24" (609.60 mm) for seamless and 26"( 660.00mm) to 72" (1829.00mm) for welded.  We have concentric and eccentric reducers, tees and caps in stock up to an outside diameter of 20" . Regular stocking of elbows to the ANSI/ASME standard in sizes from ½" (21.34 mm) to a maximum of 32" (812.80 mm) is a matter of course for us. We stock large quantities of our standard range in the common wall thicknesses from Schedule STD and Schedule 120 with long and short radii. However, we also offer dimensions in many thin and thick-walled variants, in particular with short radius

DIN
We store seamless elbows to DIN 2605-1 made of St35.8/I starting from an outside diameter of 21.30  x 2.0 mm wall thickness up to 609.60 x 12.50 mm and our other DIN fittings warehouse in sizes 21.30 mm to 609.60 mm comprises eccentric and concentric reducers, tees and caps. As specialists, in addition to standard dimensions, we also offer unusual inventory sizes such as 48.30 x 10.00 mm, 76.10 x 12.50 mm, 88.90 x 12.50 and 114.30 x 14.20 mm. We can also optionally supply DIN elbows of type 5 (R~2.5xD) from our own stock. The available dimensions with normal wall thicknesses range from 21.30 x 2.00 mm to 609.60 x 12.50 mm.
For maintenance and repair in particular, We store welded DIN fittings made of St37.0/S235 with normal wall thicknesses in sizes ranging from 711.00 x 5.00 mm up to 1220.00 x 12.50 mm..

Above and beyond the above-mentioned stock program, we continually supply elbows to DIN 2605 part 2 with 100% utilization factor, processed elbows with special angles and adapted connection dimensions. Our contacts with well-known manufacturers allow us to guarantee production of large quantities or standard elbows with special dimensions to meet your schedule at factory prices.

EN
According to current standard EN 10253-2 we store butt-weld fittings like elbow, concentric reducers, eccentric reducers, tees and more with outside diameter of 21.30 mm x 2.0 mm wall thickness up to 609.60 x 12.50 mm for seamless and  711.00 x 5.00 mm up to 1219.00 x 12.50 mm for welded. We can calculate your individual offer on current conditions for even larger pieces of welded construction. Following the latest standards we especially provide elbows according to EN 10253-1 and EN 10253-2 immediately from stock. We stock the radii of 2D, 3D and 5D in the standard version type A. In order to meet the increased demands and more complex customer requirements, we ship very quickly elbows of all radii with full utilisation design according to EN 10253-2 Type B.